■ 제품필수정보

제조사	INA
제조사품명	GLCTE12-XL
간략설명	2 Hole Flange Bearing Unit, GLCTE12-XL, 12mm ID

■ 제품사양

Bearing Unit
타입 = Flange Bearing Unit Inside Diameter = 12mm Length = 58.7mm Width = 30.5mm Depth = 81mm Number of Mount Holes = 2 Mount Hole Size = 6.6mm Mount Hole Centre-to-Centre = 63.5mm INA housing units are available as plummer block, flanged and take-up housing units in numerous different designs. The units are ready-to-fit and comprise INA cast iron or sheet steel housings in which INA radial insert ball bearings are fitted. In order to ensure function and reliability under all operating conditions, the bearings and housings are matched to each other Due to the spherical outside surface of the bearing outer ring and the concave housing bore, housing units can compensate for static angular misalignment of the shaft, see link The units are used predominantly as locating bearings, but are also suitable as non-locating bearings under low loads and speeds The housings are screw mounted on the adjacent construction. Less stringent tolerances are sufficient for the screw mounting surfaces.